Here’s a great video that’s absolutely worth the watch!
Tag: Glaze testing
Books for Glaze Prospectors
Without a doubt, Pioneer Pottery is the best resource for you diggers out there. Micheal Cardew was an absolutely incredible potter and glaze wizard. Here’s the book summary from Amazon:
You can find it here.
Pioneer Pottery is one of the classic texts in ceramic literature. Its author, Michael Cardew, was one of the seminal figures in British ceramics and this book, written partly in response to his time spent in Africa, has influenced generations of potters around the world.
As one of the early and influential figures in British ceramics, Michael Cardew was asked in 1942 by the Crown Agents to go to Nigeria to set up a pottery training center. It was his experiences there, as well as his previous time spent in the Gold Coast, that formed the basis for this book. In addition to discussions about the basics of clay and glaze materials and their properties, Cardew shows how to make pots in the Kwali, Jebba, Vume, Ilorin, and Hausa traditions of western Africa. This book is the first book to discuss all aspects of the pottery making process from materials through marketing. Michael Cardew found it necessary to find out and do everything for himself, and this is what lies behind this book. The consequence is that it is filled with a sense of discovery and firsthand knowledge.
A second amazing book is Glazes From Natural Sources. I like Sutherland’s perspective, and his instructions on building a home made ball mill and pugmill are super interesting. Although US buyers will probably find this one a little more expensive, it’s a great resource to have. Here’s the Amazon summary:
Glazes from Natural Sources: A Working Handbook for Potters, 2nd edition
Any real education in ceramics must involve, from the outset, an appreciation of the source materials—the rocks around us. While good, throwable clay may be a regional commodity, there is no part of the world that will not yield potential glaze materials in abundance. Potters therefore need to know how to exploit the special properties of local rocks quickly, reliably, and methodically. This new revised and updated version of Brian Sutherland’s classic book on making glazes from natural sources explains how to locate glaze material and construct, test, and use the glazes created.
Glazes from Natural Sources discusses rock types and other likely sources of supply, the making of test pieces, and the use of blend systems and constructions. The author also clarifies the Seger system of glaze presentation for those who, like himself, have found it difficult to grasp and apply. He covers, and supplies, formulae for glazes for all temperatures—from raku to stoneware and porcelain—and includes sample recipes. The book emphasizes careful planning and control to ensure results that are repeatable. This makes the science behind making glazes from natural sources both understandable and feasible.
Glazes from Natural Sources is fully illustrated, with diagrams of techniques demonstrated as well as images of the finished works of potters to show the results of these natural glazes. First published in 1987, this book is considered a classic by ceramicists. This edition includes a new chapter by glaze expert Nigel Wood.
Shizuku Yuteki Variation
Here’s another Oil Spot I put up on Glazy.org.
You might notice that this one has a significant addition of Cobalt, half and half Custer (Potash) and F4 (Soda) Feldspars, calcined talc, and 2% Manganese. Typical that I changed too many things to give a really useful side-by-side comparison. But I suppose when I’m coming up with new variations, that’s always been my style.
Some observations on this one:
Cobalt goes a long way and pretty dramatically alters an oilspot. With a .25%-.5% addition you get a nice shift from brown and russet glaze matrix to a darker solid black glass. Beyond 1% you can get some really nice silvery qualities to the spots. The drawback is that the more you add, the more refractory the glaze tends to get – and the longer it takes for the glazes to heal.
Concrete Celadon Glaze
Here are a couple of sets I made using concrete as a glaze material. It was pretty simple to make. The project began after finding two concrete paving tiles in a construction rubble dump. The larger one I kept for the bases, and the other I busted with a sledge hammer into gravel sized chunks. The gravel went into a bisque kiln, and the remaining slab went into the brick saw to get cut in half. Once the calcined concrete came out of the bisque, the friable powder went into the ball mill and ran for a relatively short 8 hours. After sieving out the remaining sand and large pebbles, I had myself a pretty nice looking glaze slurry. Overnight I noticed a lot of settling, I added a small bit of epsom salt, and what I guessed to be about 1-5% by weight of bentonite. It still settled a bit, but not so much that you couldn’t use it. The application of the glaze was dipping, with a bit of spraying to build a thicker layer of glaze on the top half of each piece.
Linda Bloomfield – Science For Potters
Fans of the blog will have noticed a lot more activity of late. It seems like one of my favorite old adages is appropriate: Good things come to those who wait. Rather than over promising on a bunch of ideas I may or may not deliver on, I’ll go with another one of my favorite adages: Actions speak louder than words. That last one seems… pretty appropriate.
In any event, I’ve been working on putting together a recommended books section, and felt like I might as well start with one that I’m in! regardless of that last fact, it couldn’t be more appropriate to what this blog is all about.
A few years ago when I was neck deep in my Lava Oilspot research, Linda reached out and asked me to contribute some images and information for this book. I couldn’t have been happier with how my work and images were presented. It’s got all kinds of useful information on connections between rocks, glazes, ceramics, and chemistry.
It’s thoughtfully put together, and if you’re looking to get a handle on using wild materials or learning more about some clay chemistry, this is a great one to check out.
You can find this book here, or by clicking on the image below.
John Britt explains Ian Currie Systematic Glaze Blend!
Ian Currie systematic glaze blend video!
My favorite way to systematically tweak a ceramic “Base Glaze”. John does a great job explaining it!
He can be followed on YouTube @ https://www.youtube.com/user/johnbrittpottery
And you can find more on his website @ https://johnbrittpottery.com/
Thesis Exhibition: Pyrosynthesis Writing
Matt was born in Carbondale, Illinois and grew up in Southern Indiana. In 1999 he was introduced to ceramics in high school. Matt earned his BFA in Ceramics and Art History from Indiana University in 2007. During this time he spent significant time living and traveling in China, studying the history and technology of Chinese porcelain. After graduating from IU, he spent several years living in Seoul, South Korea. Before coming to Graduate school at USU, Matt was a ceramics artist in residence at the Armory Art Center in West Palm Beach, Florida. He was the first recipient of the USU X-STEM fellowship, and his research involves material science, geology, and ceramics.
Daily life plays an important role in what I make and why. The needs of the kitchen and home are for me, like many potters, a useful starting point for conceiving specific utilitarian forms. I make a lot of cups, bottles, and drinking vessels. Lately I’ve been interested in the idea of designing and making these vessels in sets. For me, there’s nothing better than gathering with a group of friends, eating, drinking, and using handmade ceramics. I’m motivated to make objects that enhance these experiences and enliven domestic spaces.
My work explores the intersection of ceramics, material science, and geology. In my mind’s eye, glaciers give way to icy celadon glazes, volcanoes ooze magma as molten glazes cascade down curves and roll off edges, crystals grow and forms take shape when conditions are right. I’m an avid rock hound, and for the past three years I’ve explored the mountains and landscapes of Utah, Idaho, and Montana. There are many gemstones that have analogues in ceramics – and much of my research has been centered on studying and understanding the underlying science of materials and firing processes. For me there is something incredible and romantic about the idea of transforming rocks and dirt into beautiful things.
In the end I strive to integrate my desire to make utilitarian pottery with a love of materials and nature. What drew me in and keeps me interested on a daily basis are the endless variations possible in ceramics. The idea of constantly searching for new possibilities is at the heart of who I am and why I do what I do. At the same time, I love the constant challenge of pairing forms and surfaces, sourcing from the history of ceramics as I source materials from my local surroundings. I think my strongest work finds a balance between all of these ideas, and my hope is that my work evokes a similar curiosity in the people who see and use it.
Pyrosynthesis: n. synthesis or creation initiated by or resulting from the action of heat.
I like to joke that I’m equal parts artist, pyromaniac, rock hound, and nerd. Add to that an interest in history and technology, along with a penchant for experiments and testing, and it describes who I am and what I do quite neatly. As a graduate student in ceramics at Utah State I’m in the perfect place to satisfy all of these interests. For the past three years I have specialized in the transformation of common raw materials into ceramics through the action of heat and fire – hence the title. There are a lot of parallels between what I endeavor to do, and what the alchemists of ancient history sought to do, namely to turn lead into gold. In my case, I’m interested in the transformation of locally abundant rocks and dirt into objects of beauty and interest.
This exhibition, then, is a culmination and presentation of my work on this subject. To explain it simply, all of the work in this gallery has at least one component of a prospected (dug up or picked up off the ground and drug back to my studio) material utilized in the finished piece. The best example is the granite bottle and cup set on the granite slab. In this piece, the glaze is made entirely out of the finely ground up granite rock dust. Coarser granite rock particles were incorporated into the clay body, thus providing black speckles on the unglazed clay surface. The base, too, is a broken granite boulder that has been cut and polished flat to provide a stone surface for the ceramic objects to live on. My hope with these combinations is to draw a direct connection between the ceramic object and the materials they come from. For me, the novelty of melting rocks in a ceramic kiln never gets old – each experiment generates still more new questions than answers, and Utah has been an amazing place to find all kinds of interesting materials. I’ve included 9 of the most interesting materials that have captured my interest.
Starting just to the right of this statement, I’ve included several piecess to help give context to my process and research and shed light on how the finished pieces come about. I should mention, too, that I took all of the 2 dimensional images with the Scanning Electron Microscope here on campus. I often study my experiments and tests for a long time before they end up on finished pots, and the SEM has given me the ability to analyze and learn about the materials and firing process in a way that I still can’t believe. Not only are these images a wealth of information and data, but from an artistic standpoint, I see them as dramatic landscapes and images of incredible beauty. Finally, the pots themselves are at the heart of everything. Over the course of my graduate studies at Utah State my sense of design and craftsmanship has been challenged like never before, the result of which is a body of work that is hands down the best I’ve ever made. Thanks for coming in and having a look around.
From Top to Bottom, Left to Right.
- Manganese Saturated Kaolinite/Halloysite from near Eureka, Utah.
Manganese is a very interesting element, and provides some wonderfully interesting surfaces. In certain conditions it can yield dramatic rainbow iridescence. Small additions account for the optical phenomena in the iridescent Hare’s Fur Glazes as well as the Manganese Saturate Glazes.
- Quartzite from Willard Canyon, Near Brigham City, Utah.
This is a rather interesting flavor of Quartz, having trace amounts of Chromium, which accounts for the lovely green color. It provides a very high concentration of Silicon Dioxide (glass) in glazes. It was used in the dark green Basalt Celadon glazes.
- Dolomitic Limestone with Calcite from Dry Canyon, Logan, Utah
The first material I began experimenting with at Utah State, this material is used in glazes as a glaze flux – which is to say, it’s a material that lowers the melting temperature and promotes flowing, dripping glazes. It’s used in all of the black Oilspot and Hare’s Fur glazes.
- Travertine from Porcupine Reservoir, Utah.
I picked this stuff up not knowing what it was, but fascinated by the texture. I later learned what it was and that it formed in chaotic hydrothermal conditions, you could think about this material as nature’s very own hard water deposit. Similar to the Dolomite, it acts as a flux in glazes. It was used in conjunction with the Dolomite and Quartize on the bluish grey teapot.
- Black Schist from Willard Canyon, near Brigham City, Utah.
Essentially a metamorphosed clay or shale, this flavor of slate contains some really beautiful pyrite (fools gold) inclusions. By itself it is refractory and unappealing, but with a 10% addition to a celadon base glaze, it provides a beautiful sky blue. You can see the blue and the pyrite inclusions on the blue bottle set.
- Topaz bearing Rhyolite, from Topaz Mountain, Utah.
This stuff is just amazing. High in Silica and Alumina, it also speckled with Topaz gemstones (mostly very small in scale – this sample is exceptional). It’s features in all of my Basalt/Rhyolite glazes, which I’ve named Fiske Lava Oilspot. The recipe? 3 Parts Rhyolite, 1 Part Basalt. See the small test tiles for what it looks like fired by itself.
- Granite from Cook Canyon, Near Willard, Utah
Plain old granite. It turns out this stuff makes a beautiful range of glazes completely by itself. Its used as a glaze on the 2 Tiered Granite Slab piece, and it’s used in the matte black glaze on the set of 4 cups on the smaller granite base. The matte black comes from an addition of 1 part Hematie (Iron Ore) to 4 parts Granite.
- Vesicular Basalt (Lava Rock) from Sid Butte, Idaho.
The local geology abounds with basalt of all flavors, but compositionally, they’re all relatively similar – at least as far as my glazes and firing process is concerned. This specific variety got me started on researching basalt glazes, and when I started using the lava oilspot glazes I incorporated local Utah varieties from outflows near Delta, Utah, as well as roadcuts off in Box Elder County, Utah. It accounts for the rich reds and oranges in my Lava Oilspot Glazes.
- Iridescent Hematite from near Eureka, Utah
This spectacular sample survived my hammer and the studio milling equipment. It’s nearly pure iron. Less spectacular examples have been incorporated into all of the Iridescent Hare’s Fur Glazes and Black Oilspot Glazes, as well as the Black Granite Cup Set.
Making a Glaze
A glaze is nothing more than a glass-like coating fused to a ceramic surface by heat.
Nearly any rock or mineral can be utilized in a glaze. Most ceramics studies are stocked with materials that have been mined and commercially prepared for consistency and ease of use. But you can easily dig up anything and see what happens, sometimes it’s not at all useful for ceramics, but sometimes it is – and these are wholly unique to the place you get them from.
- The first thing I do when I bring back a sample (1a,1b) to my studio is to use my trusty sledge hammer to break a small sample into pea-sized gravel. This gravel then goes straight into a small bowl (1c), and straight into a kiln. After this initial firing to 1250C (2350F – that’s HOT!), I can usually get a very good idea of what a sample might do in glazes. I might not have any idea what a material is – but after firing it, you can tell how it will behave at standard ceramic temperatures. Sometimes one gets lucky (as was the case with the granite) and ends up with a material that makes a perfectly acceptable ceramic glaze all by itself. Usually though, it takes some testing to find out how to fire specific materials.
- Because the atmosphere in the kiln has an effect on the color of the glazes it’s useful to do initial melt tests in an oxidized (regular atmosphere) firing (2a) as well as firing the material in a reduction (excess fuel, reduced oxygen atmosphere) (2b) The firing atmosphere changes the color of the clay and the material quite significantly. My Oilspot glazes rely on regular atmosphere firing conditions for the phenomena of oilspots to occur. Celadon glazes, on the other hand, require reduced oxygen conditions for the iron to change from it’s oxidized (rust!) red color, to a reduced black color. These tiny black iron molecules are what make my celadon glazes appear blue.
- (3) is a sample of granite melted at 1250C. Right away I could tell this was going to be a great material to work with. With no additions it’s good to apply directly to pots as soon as it’s milled. The liquid in (6b) is pure granite glaze.
- (4) is a sample of Black Schist melted at 1250C. You can see that this sample needs to be amended or mixed with another material to make a useful ceramic glaze.
- It can be useful to fire samples at lower temperatures to find out when exactly they start to melt and fuse to a clay surface. (5) is a sample of basalt fired to about 1000C, which was hot enough to affect the iron in the basalt, but not enough to melt the bulk of the other minerals present.
- After establishing that a rock is going to be useful, it’s time to begin preparing it for use as a glaze. A 15 pound (bowling ball sized) hunk of rock will provide about 5 gallons of glaze. 5 Gallon buckets are a standard in most studios, and I used about 5 gallons worth of glaze to finish all of the black and Hare’s Fur Oilspot pieces in this exhibition. Making a rock a glaze material is a rather simple process of using a hammer or milling machine to crush rocks into fine powder. My favorite way to do this is to use a ball-mill, which is essentially a heavy-duty rock tumbler. To a tightly sealed metal jar you add: 3 Parts material, 3 parts water, 4 parts porcelain balls(6a). Put this jar on a machine that spins, and in about 24 hours it does the job that takes Mother Nature millions of years (who is constantly turning mountains into clay). The mill works by mechanically mixing and breaking the material into finer and finer pieces. Your done when the material (6b) passes through a fine mesh strainer. You can then dry it out and use it like any other ceramic raw material (6c) or you can dip or apply it directly onto pottery or test tiles (7).
Basalt, Iridescence, and the Firing Process
In the course of poking around and looking at rocks in Idaho, one particular sample of basalt caught my attention. The iridescent vesicular basalt on the right an example of what I picked up. I became very interested in the question of why this material had a bluish iridescent metallic sheen – and why the rocks next to it didn’t. I speculated that since some ceramic glazes can be fired in ways to make them turn iridescent (raku firing, for example) it might just be the case that I could fire basalt in a way that it would turn out with the same lustrous metallic surface.
I then set about testing my theory. I started by making nine 8” stoneware tiles, which would all have the same application of the same ground basalt. I then designed a series of firing schedules where I would change two variables: 1.) Atmospheric Conditions Inside The Kiln – specifically whether I would keep the kiln in oxidized natural atmosphere or whether I would reduce the available oxygen by firing in a gas rich environment. 2.) Cooling Speed. Of particular importance in the color of ceramic surfaces is the speed at which a molten, melted glaze cools down and crystallizes when the burners are shut off and the kiln returns to room temperature. In this series of firings, I took careful notes, paying very close attention to both the atmosphere in the kiln and the rate at which I allowed the kiln to drop in temperature.
I did indeed find that I could reproduce a metallic iridescent blue sheen from basalt lava rock (see the tile in the middle). The trick was to fire the kiln normally, and then cool the kiln very rapidly to about 1000C (which is the stage in which the viscous, molten material starts to harden) and then hold the kiln at a steady temperature in a reduced oxygen environment for an hour or two, then begin a very slow -2 degree per minute drop in the same reduced oxygen environment until the glaze had completely solidified around 700C.
What I learned through this series of experiments is that the iron in basalt and other iron rich glazes is greatly influenced by rate of cooling and atmosphere. By manipulating the atmosphere and rate of cooling, I could affect the colors of glazes – thereby producing unexpected surfaces and colors. It was this research that then led me to develop all of the variations found in both of the installation pieces in this show. The glazes are the same- but the firing processes are very different.
Rhyolite/Basalt Glaze (Lava Oilspot Glaze)
While it was exciting to work with basalt as a material, in most cases it left something to be desired as a functional, utilitarian ceramic surface. It had the tendency to run completely off the pots, and it often had a blistered, matte surface. Very few glazes in ceramics contain one singular material, sometimes a glaze recipe can call for as many as 20 different materials. I needed to add something to my basalt to make it more functional, and a breakthrough came after my Mineralogy class fieldtrip to Topaz Mountain, in Southwest Utah where I collected a 5 gallon bucket of Rhyolite gravel.
Rhyolite, which is another volcanic rock and it lies on the on the other end of the spectrum of igneous rocks. Rather than being high in Iron and Magnesium like Basalt, Rhyolite is very high in Silica and Alumina. In glaze chemistry, you can think about Alumina as the opposite of a flux. Rather than lowering the melting temperature, it raises it. Referring back to the local materials in this show, you might notice that I’m using Dolomite and Travertine to increase the melting and moving of glazes in the kiln. Conversely, I’m using Rhyolite to stiffen and slow down the melting of the glazes.
Often the first experiment to do with a prepared local material is to do what’s called a line blend. The five pieces on the shelf below are what are called test tiles, because it’s often not feasible to devote a piece of pottery to a glaze you don’t know much about. In a line blend, you move in steps from one material to another. The tiles below represent a progression from 100% Basalt , to 75:25, to 50:50, to 25:75, then to 100% Rhyolite. In other words, on one end of the line you have one material, in the middle you have a perfect mix of the two, and on the other end of the line you have the other material. You can move in big steps, which takes less time, or you can move incrementally. The point then, for a line blend is to help you narrow in on a nice proportion, and sometimes a second series will help you narrow it down further – say the 50:50 and the 75:25 test tiles look very promising, you might then decide to do a second progression from 50:50, 55:45, 60:40, 65:35, 70:30, and then 75:25. The possibilities are endless, and you can add in a third and fourth material to the blends and very quickly use up a lot of test tiles and explore a lot of variations. I’ve also included some of my notes, which cover only a few of the thousands and thousands of glaze tests I’ve mixed and fired.
I was lucky though and the first line blend yielded my Lava Oilspot Glaze. It’s 1 part Basalt, 3 parts Rhyolite. A very simple glaze recipe for sure. But remembering also that the firing and cooling have a great deal of influence on the finished surface, I’ve spent the last year investigating the possible variables on this very simple recipe with very, very complicated firing and cooling processes. The results of which are the 16 Rhyolite/Basalt Bowls, all of which were made from the 1:3 recipe, but fired in very different kiln cycles. I’ve also included some examples of several of my firing cycles.
The Scanning Electron Microscope
My research with the SEM on campus began with a generous scholarship from the Office of Research and Graduate Studies. With my membership to the Microscopy Core Facility, I was able to take my own samples and prepare them for analysis on a state of the art Quanta Scanning Electron Microscope. Fen-Ann Shen, who oversees the SEM was a patient teacher, and she taught me first how to use the equipment on calibration samples, and then later, to prepare my own ceramics and begin looking at the surfaces and structures on the nano-scale.
It should be said that an SEM is not an optical microscope – and by that I mean it’s not what you’d normally imagine a microscope to be, namely, a tabletop instrument with two lenses that you look in. While optical microscopes are useful for looking at surfaces, magnification maxes out at about 800-1000 magnification. An SEM, on the other hand, operates on the principal of firing a concentrated beam of electrons at a sample and analyzing the electrons as they bounce back (backscattered). Scanning is in the name because this beam moves across the surface of the sample, building an image as the resulting information is compiled. While an optical microscope maxes out at around 1000x, the SEM at USU is capable of 300,000x magnification. In effect, you can look at nano-particles in high resolution. That’s 1/1,000,000,000 of a meter! A human hair is about 100,000 nano-meters in diameter. It’s therefore quite easy to get completely lost in an area smaller than an eighth of an inch.
The images in this exhibition represent some of the most exciting surface features and topographies from my own glaze. To date I’ve only looked at 3 glazes, and all of them are in this exhibition. I’ve included the actual samples themselves, which are mostly broken shards and chips of glaze. As I began to learn more about the equipment and preparation, I began to make samples specifically to fit on the small conductive sample mounts.
I might also add that these images represent the very beginning (I’ve spent less than 20 hours looking at my glazes) of what I see as a very exciting chapter in my exploration of materials and glazes. Most published images are the result of hundreds, if not thousands of hours spent in front of the monitor, patiently waiting for scans to complete. I was lucky, then, to capture the images I did, and I’m very excited to continue this research in the future.
A special thanks to The Office of Research and Graduate Studies along with The Caine College of the Arts for providing me with an incredible ART-STEM fellowship – without this funding, it wouldn’t have been possible for me to devote all of my time and energy to focus on my research. My fellowship has opened doors to departments across campus, and has facilitated a great amount of collaboration and research outside of the Department of Art and Design.
Thanks to the USU Ceramics Faculty for giving me a long leash to play around and melt things and make messes – and thanks also for reigning me in when I got carried away and always reminding me that I can’t fire kilns without actual work. Without craftsmanship there is no concept.
Thanks to my Graduate Advisory Committee for helping me decide what I should be doing, not what I could be doing. Thanks also to John Shervais and the Geology Department for help with my projects and insight into material science.
Thanks to Kenzi Lowry for help with the graphic design of my postcards and posters and helping me format the SEM images and get them ready for printing. Thanks for working under impossible deadlines and tolerating my constant adjustments and second guesses and indecisiveness.
Thanks to Fen-Ann Shen for training me on the use of the Scanning Electron Microscope and helping me figure out how to prepare and analyze my ceramic samples. I look forward to investigating more materials in the Microscopy Core Facility.
Thanks to Nicholas Gialanella for providing me access to the printers in Photography and working with me to produce the SEM images.
Thanks to Ryoichi Suzuki, who had a huge influence on my thinking about the possibilities of stone and for giving me access to the sculpture facilities.
Thanks to Miles Howell for his help in preparing and roughing out the stone bases – he got done in hours what would have taken me days!
Thanks to all of my graduate and undergraduate colleagues in Ceramics, for putting up with my messes and firings, and for inspiration and camraderie. Also, a shout out to the corner for the tough love.
A final thanks to The Department of Art and Design. Laura, Becky, Tori, and Janet, you’ve all been incredibly helpful and supportive not just in the run up to this show, but throughout my time at USU. Thank you!
Basalt as Colorant in Celadon Glazes
More local Basalt. Here used as colorant in high fire celadon glazes. On the top left, the raw material which was collected from various places throughout Idaho and Utah (and all mixed together), bottom left the homogenous, calcined, milled, sieved, and dried material ready for glaze.
In this set the basalt is supplying the iron necessary for that timeless celadon blue. Its also bringing significant additions of magnesium and calcium to the recipe. The % of basalt here ranges from 0 to 10% in 2.5% steps – applied to a dark stoneware and porcelain tiles.
This series were fired in a very fast and simple cone 10 reduction firing with a very basic reduction cool. 6 hours start to finish, in a small fiber test kiln — Heavy body redux for 30 min @ ^012-^08, then light redux to ^6, then a medium redux to ^10. At soft cone 11 I crash cooled a few hundred degrees, turned the air and gas down, dampered in, and put the kiln into about a -4°/minute cool, periodically opening the door to quickly crash cool -30 or -50 degrees until 1400, then shutting everything off. In some cases reduction cooling will effect the color and quality of the glazes significantly, but here it only effected the stoneware – keeping the iron oxide on the surface in its black reduced form. A good reduction firing will yield these glaze colors with no special effort cooling – here the RC was strictly for a darker stoneware color.
Fiske’s Tichane Chun
Custer Feldspar 48
Calcium Carb. 20
Bone Ash 1
(Iron Oxide 1.5)
— A range .5 to 3% Iron Oxide gives a similar spectrum of blue as the basalt does here – different flavors of Iron bearing materials yield different flavors of glaze, obviously. I’ve tried probably more than 50 kinds of iron over the years – try what you have and figure out what flavor you like best!
Fiske’s (Pinnell Clear) PC Celadon
Custer Feldspar 25
Grolleg Kaolin 20
Calcium Carb. 20
(Spanish Iron Oxide .85)
Rhyolite and Basalt Glazes
I was beyond excited to work with my newest found material, a rhyolite from Topaz Mountain, in Juab Country, Utah. This time rather than choosing a handful of very large rock samples (to insure relative material consistency), I instead went to a wash and filled up a 5 gallon bucket with very fine material the size of course sand. My reasoning this time was that consistency is completely relative, and as long as I get materials from the same spots, it doesn’t matter – and I can grab material that has already been 99% processed for me. In the end I think this worked out, because I was able to run 5 gallons of sand through our ball mill with 2x 1 gal. ball mill jars in 10 batches. But I’m getting a bit ahead of myself, because I think it’s important to test fire a material before you go through the trouble of ball milling. So my new first step in dealing with materials (after identification of course) is to take a small chunk, put it in a small dish, and fire to cone 10 in reduction. Since this is my primary temperature range, that’s it, if there are chances I’ll also put similar samples into cone 6 oxidation as well as an oilspot firing schedule, which is about cone 12 oxidation. Here was the result at cone 10, in reduction:
Looks a lot like a fired chunk of granite or feldspar. Onwards with the milling!
Someone asked me about my process for ball milling, and here it is: Fill a 1 gal ball mill jar 1/3 with mixed sized media (approx 50% 1/4″ balls, 25% 1/2″ balls, 25% 1″ balls) then fill the jar with 1/2 gallon of water, then fill the the rest of the container up with material until it’s about 2/3 full.) If I had more containers I wouldn’t exceed filling the jar 1/2 way, but my circumstances are what they are, and I haven’t needed to change anything yet, such as it is.
In reduction, this rhyolite material was surprisingly similar to my ice crackle glaze. I think with very little modification (a small addition of clay, bone ash, and maybe a bit of frit) I’m nearly positive this will look and feel like a Kuan, ice crackle glaze.
Once I had all of my material milled, I let it sit overnight and then drained off the excess water, leaving me with a glaze slurry with an SPG of 1.58 (That’s 79g of material in a 50cc syringe). That’s only important if you want to know how much material you have per given volume. Since I was going to blend this with a basalt material that was also in solution, I needed this info. After taking the SPG of my basalt material, which happened to be 1.54, I did a simple line blend. On both sides are the materials by themselves, in the middle a 50/50, and on the left and right middle 25/75.
Pretty interesting results, I think. The big surprise was how sweet the 25% Basalt and 75% Rhyolite mix came out.
Finally, because I was looking for an oilspot/tenmoku type glaze with this research, I should also detail my firing schedule. Here’s my current Blaauw gas kiln firing schedule:
|0||time_temp 00:00 5|
|1||time_temp 01:30 200|
|2||time_temp 07:00 1160|
|3||time_temp 01:30 1200|
|4||time_temp 01:00 1220|
|5||time_temp 02:00 1230|
|6||time_temp 01:15 1252|
|8||time_temp 00:08 1252|
|10||time_temp 00:30 1220|
|11||time_temp 01:30 1200|
|13||time_temp 02:00 1000|
|14||time_temp 02:00 800|
|15||time_temp 02:00 700|
|16||time_temp 02:00 500|
|17||time_temp 02:00 300|
|18||time_temp 02:00 50|
|19||time_temp 04:00 50|
Blaauw kilns have the capability of firing in extremely oxidized conditions – blowing in somewhere to the tune of double the amount of air needed for complete combustion. The default, and maximum air value is 200. An neutral flame is around 100, and a smoky reduction is something like a 70.
Basically, this program fires up to cone 6 in about 9 hours, and then goes slowly up to 1252C, reduces for 8 minutes, and then goes back to oxidation, drops to 1220 over the course of 30 minutes, then drops to 1200 over the course of an hour and a half. I’m still very much tweaking this schedule, which works very well for some glazes, and not so much for others.
For a very long time now I’ve wanted to utilize some volcanic rock as glaze. In much of my research here at Utah State I’ve been looking at iridescent phenomena, both in glazes and in the natural world. It was quite fortuitous, then, when geology grad Doug Jones asked me to accompany him on an excursion just over the border into Idaho to look for Xenoliths, which at this site are very deep mantle rocks that have been blasted quickly to the surface in younger volcanic flows.
While we were poking around looking for Xenoliths, I started picking up some rather remarkable chunks of iridescent vesicular basalt. Vesicular basalt is characterized by it’s frothy, bubbly matrix… if you don’t know what I’m talking about, think red lava rock. It’s one in the same. Here’s an example:
After picking up a good pile of this stuff, we went on to find about 40 Xenoliths, as well as some other interesting stuff.
Once I got back to the studio it was time to figure out if this stuff was even viable. My standard go to for this is to break off a small chunk, put it in a dish, and fire away.
After putting theses samples in a cone 10 reduction kiln and a cone 10 oxidation kiln, it became quite evident that I had something useful.
After deciding that this was a good road to go down, the hard work of crushing and processing this stuff began. I started by breaking the boulders down into gravel sized pieces. These then went into out ball mill. I could have shaved down the time it took to mill this stuff by using intermediate crushing equipment (an impact mill, or hammer mill) but I found it easier in the long run to load up our ball mill and run for about 24 hours, sieve out the useful material, add in more course material, and repeat. By the end of 4 days I’d run all the material through and was left with tumbled lava rock:
With my material milled down fine enough to pass easily through a 100mesh sieve, I then let it sit for a few days, pouring off the water each morning, until gradually the material became thicker and started to resemble a glaze. Because it was ball milled, the particles were quite small, and suspend really well. The next step was to take this glaze material and see what happens in the kiln. I was quite pleased:
Now that I knew I was dealing with a viable glaze, I couldn’t wait to get this stuff in the kiln and firing it in a weird, experimental reduction cool cycle. Last year I discovered some really incredible surfaces by cooling a kiln in reduction, and holding at certain temperatures. In this case, the geologists have told me that basalt solidifies at about 980C, so I’ve been crash cooling the kiln to around this temperature, holding in a reduced environment, and letting the metallic compounds crystallize in reduction. My speculation is that I can somewhat re-create the conditions in which iridescent phenomena occur. Lo and Behold:
This result is remarkably similar to effects you can achieve in Raku, or Lustre firing… but it’s a different phenomena, and relies on totally different elements; namely, Iron. Whereas raku usually derives rainbow iridescence from Copper and Cobalt, and lustres from Silver, and Bismuth, these colors are coming from Iron with trace amounts (less than .5% Manganese and Titanium). It’s very interesting on the ceramics side, and the geologists are quite interested too, because the phenomena is not wholly understood. One of the perks of being a graduate student with STEM funding is that I have access to fancy analytical equipment. This analysis has allowed me to build a material profile in Insight Glaze Software.
To that end, my future plans with this research will involve more experimentation with the firing process. In fact, I’m currently working on a piece that will exhibit between 10 and 20 wall hanging tiles that all feature the exact same clay and glaze with different firing schedules. At the same time, I’ll also continue to tweak this material by adding other oxides to end up with brand new flavors of glaze.